How to Switch an AnyTone 868/878 DMR Radio Between Professional and Amateur Mode

To switch an AnyTone 868/878 DMR radio between professional and amateur mode, you can follow these steps:

1. Turn on the radio: Make sure the radio is turned on and in standby mode.
2. Enter programming mode: Press and hold the PTT button and the top side button (which is the button above the PTT button) at the same time for about 2 seconds until the radio beeps and the display shows “PROGRAM MODE”.
3. Enter the password: When prompted for a password, enter “868PRO” for the AnyTone 868 radio, or “878PRO” for the AnyTone 878 radio.
4. Choose the mode: Once in programming mode, use the channel knob to scroll to the “SETUP” menu, and then press the PTT button to select it. From there, scroll to the “RADIO MODE” option and select it. You can then choose either “AMATEUR” or “PROFESSIONAL” mode.
5. Exit programming mode: Once you have made your selection, press the top side button to exit programming mode. The radio will beep and display “EXIT PROGRAMMING” before returning to normal standby mode.

It is important to note that switching between amateur and professional modes can affect the legality of your use of the radio, depending on the regulations in your area. Make sure you are using the radio in compliance with any applicable laws and regulations.