Mat-Tuner mAT-1500Pro HF SSB 1500W (PEP) 1.8M to 54MHz Automatic Antenna Tuner For YAESU ICOM& KENWOOD Transmitter Amplifier
The MAT-1500Pro offers a new improved, lighter case and adds Yaesu, Icom, and Kenwood transmitter interfaces, which can be tuned by transmitter control – reducing manual user operation.
The mAT-1500Pro automatic antenna tuner is specially designed for modern high-power transmitters and power amplifiers. It can provide reliable high-performance tuned antenna solutions for land and marine deployments and allows a maximum of 1500W (PEP) RF signals to pass. This is a universal tuner that does not require a control cable to be connected to the transmitter. Users can operate it through the multi-function buttons on the front panel. The tuner has a PTT signal control function. When a tuning cycle is started, the transmitter’s PTT signal is automatically interrupted by the power amplifier.
With 1500W(PEP) RF power handling capability, the Mat-1500 can be used for CW and SSB, over the full 3.5 to 54MHz HF band.
Sufficient Memory Capacity and Quick Tuning – With up to 16,000 data channels for storing LC configuration data, the tuner has an almost unlimited memory capacity. The tuner, using a highly optimized tuning algorithm, new frequencies are tuned in typically less than 5 seconds, and previously tuned frequencies are tuned within 100 mS.
High-Strength Alloy Housing The mAT-1500 has high-strength alloy housing, strong and sturdy. The front and rear panels are machined from a complete piece of allowed aluminum using a milling process.
The simple operation is the main characteristic of the tuner. There is only one square button on the front panel of the tuner. This button can complete the operation of starting tuning, offline and online functions. It is also an indicator light and can also show the working status of the tuner.
Key Features,
Fast Tuning,
High Efficiency,
Large-capacity memory,
Accurate bridge VSWR inspection,
3.5 to 54 MHz,
1500W RF power handling,
Adapt to various antennas,
High-strength alloy housing,
The milling production process,
Tuning Impedance: 6 to 1000Ω,
Specification, Frequency Range: 3.5-54MHz,
Power Rating: 1500W PEP and Average,
Mode: LSB, USB, CW, FM, FSK, RTTY,
Input Impedance: 50Ω,
Tuning Impedance: 6 to 1000 Ohms (approximately 10:1 SWR),
Tune Time: Memory 100ms, initial tune 5 sec (typical),
Tune Power: 5-15W, 15W max, excessive power will damage the tuner,
Memory Channels: 16,000,
Tune Modes: Fully automatic and memory,
RF Connector Type: M-type socket, UHF, SO-239,
Auxiliaries Receive Antenna Power: 10-15V DC, 1 A max,
Operational Temperature: -20 to +60°C,
Finish: Black,
Enclosure: Aluminium Alloy,
Dimensions: 320mm x 240m x 90mm,
Weight: 4.5kg.
Reviews
There are no reviews yet.